Workhorse Switches and Connections
The Operator Control Console top includes the following switches:
|
SWITCH
|
LOCATION
|
FUNCTION
|
|
Main Power Switch
|
Top Left
|
Turns the Operator Control Console on and off.
|
|
ROV Power Switch
|
Center Left
|
Turns the ROV power on and off. Twist in the direction of the arrows to turn on the ROV power and press the switch to turn it off.
|
|
LIM Module
|
Central Right
|
Test and Reset buttons can be found on the LIM.
|
The Operator Control Console top includes the following connections:
|
CONNECTION
|
LOCATION
|
FUNCTION
|
|
Power (100-240 Volts AC, 50, 60 Hz)
|
IEC male
|
Used to connect the Operator Control Console to a power source.
|
The Operator Control Console side includes the following switches:
|
SWITCH
|
LOCATION
|
FUNCTION
|
|
12 VDC Circuit Breaker
|
Bottom Left
|
USed to protect the 12 V DC power for topside accessories.
|
The Operator Control Console side includes the following connections:
|
CONNECTION
|
TYPE
|
FUNCTION
|
|
Tether Whip (Specifications)
|
8 pin round female
|
Used to connect the Operator Control Console to the tether for ROV power, communications, video and accessory support.
|
|
Monitor Power and Touch Screen Connection
|
|
Provides 12 Volts DC. Used to provide power and touch screen function to the monitor.
|
|
Monitor Signal
|
HDMI, female (2)
|
Used to provide the video signal to the monitor.
|
|
USB Ports (7)
|
Type A female
|
Can be used to connect USB devices to the computer via the Operator Control Console.
@ are dedicated to the keyboard and hand controller. 5 additional are available for other devices.
|
|
Ethernet
|
RJ-45 female
|
Can be used to connect the Operator Control Console to the computer for Ethernet based ROV accessories.
|
|
12 VDC
|
DC Type M female (2)
|
Can be used to to provide 12 V DC power to topside accessories.
|
|
