Workhorse Switches and Connections

The Operator Control Console top includes the following switches:

SWITCH	LOCATION	FUNCTION
Main Power Switch	Top Left	Turns the Operator Control Console on and off.
ROV Power Switch	Center Left	Turns the ROV power on and off. Twist in the direction of the arrows to turn on the ROV power and press the switch to turn it off.
LIM Module	Central Right	Test and Reset buttons can be found on the LIM.

The Operator Control Console top includes the following connections:

CONNECTION	LOCATION	FUNCTION
Power (100-240 Volts AC, 50, 60 Hz)	IEC male	Used to connect the Operator Control Console to a power source.

The Operator Control Console side includes the following switches:

SWITCH	LOCATION	FUNCTION
12 VDC Circuit Breaker	Bottom Left	USed to protect the 12 V DC power for topside accessories.

The Operator Control Console side includes the following connections:

CONNECTION	TYPE	FUNCTION
Tether Whip (Specifications)	8 pin round female	Used to connect the Operator Control Console to the tether for ROV power, communications, video and accessory support.
Monitor Power and Touch Screen Connection		Provides 12 Volts DC. Used to provide power and touch screen function to the monitor.
Monitor Signal	HDMI, female (2)	Used to provide the video signal to the monitor.
USB Ports (7)	Type A female	Can be used to connect USB devices to the computer via the Operator Control Console. @ are dedicated to the keyboard and hand controller. 5 additional are available for other devices.
Ethernet	RJ-45 female	Can be used to connect the Operator Control Console to the computer for Ethernet based ROV accessories.
12 VDC	DC Type M female (2)	Can be used to to provide 12 V DC power to topside accessories.