Configuration Commands

The following configuration commands are available for updating firmware and configuring M5 modules for MSS vehicle systems:

• vr_refresh - Refresh the firmware for a module
• vr_enum - Enumerate (list) the connected modules
• vr_setid - Set the Node ID and Group ID for a module
• vr_debug_putty.py - Debug and/or configure a module
• vr_create_virtport_all.sh - Create virtual ports for modules not connected directly to the RS-485 bus

These commands are entered using a terminal window.

These commands are case sensitive.

More information about using these commands can be found in the following section of this guide.