Computer
The computer provides the hardware and operating system platform for VideoRay ROV control software and image and video editing and production.
 For information about using the computer in general, see the instructions that came with it.
The computer is mounted to a tilting plate in the Operator Control Console. This allows the computer to be used in laptop mode or tablet mode. To switch between modes, release the plate latch and tilt the plate down until it can be removed from the retaining pivots. Reverse the plate and reinstall it in the pivots.
VideoRay does not recommend installing additional hardware or software on the computer unless you are familiar with its operation and confident it will not interfere with the VideoRay Cockpit control software or the computer's ports. Software that is packaged with VideoRay accessories has been tested and is approved for use.
The computer includes the following connections :
|
CONNECTION
|
TYPE
|
FUNCTION
|
|
Power
|
Manufacturer Standard
|
Used to connect the computer to a power source. The Operator Control Console includes two unswitched GFCI protected IEC female power outlets. One of these is available for dedicated use for the computer.
|
|
USB
|
Type A female
|
Can be used to connect USB devices to the computer.
|
|
Display Port
|
Display Port Female
|
Provides an HD video signal. This can be used to connect the computer to an external monitor.
|
Computer specifications are subject to change without notice.
|
