Instruments

In addition to controlling the Pro 4 Ultra and displaying video, VideoRay Cockpit provides numerous feedback and control instruments. These instruments float on the desktop and can be moved, resized, turned on or off or made transparent. You can also restore their sizes and positions to their default locations.

VideoRay Cockpit Display with Instruments Highlighted

Toggling Instruments between Opaque and Transparent Individually

To make an instrument transparent, double click on it with the right mouse button. To restore an instrument to opaque, double click on it again with the right mouse button.

Closing Instruments

To close an instrument, hover the mouse over the instrument, and then move the cursor toward a border. When the cursor reaches the border, the border will highlight and an "X" will appear in the upper right. Click on the "X" to close the instrument. See the section below and the User Settings and Instrument Display sections for more information about how to close and reopen instruments.

Additional Control Methods

In addition to the operations above that work directly on individual elements, there are other methods to control instruments individually or as a group.

User Settings

The Instruments tab within User Settings allows you to turn instruments on or off individually. The Instruments tab also has a button to restore all of the instruments to their default sizes and locations. See the User Settings Section of the VideoRay Cockpit Guide.

Control Bar Tools

The Control Bar has three tools that allow you to close all instruments, make them all transparent, or make them all opaque. See the Instrument Display Control Section of the VideoRay Cockpit Guide.

Instruments Display Control Hierarchy

Some settings methods take precedence over other settings methods.

• The User Settings Off setting for an individual instrument overrides the Control Bar Opaque and Transparent settings for all instruments.

• The Control Bar Instruments Off setting for all instruments overrides the User Settings On setting for an individual instrument.

• The Control Bar Transparent and Opaque settings will override the current state of an open instrument.