Switches and Connections
The User Control Console top includes the following switches:
|
SWITCH
|
LOCATION
|
FUNCTION
|
|
Main Power Switch
|
User Control Console top upper left
|
Turns the User Control Console on and off.
|
|
ROV Power Switch
|
User Control Console top central left
|
Turns the ROV power on and off. Twist in the direction of the arrows to turn on the ROV power and press the switch to turn it off.
|
|
LIM Module
|
User Control Console top central right
|
Test and Reset buttons can be found on the LIM.
|
The User Control Console top includes the following connections:
|
CONNECTION
|
LOCATION
|
FUNCTION
|
|
Power (100-240 Volts AC, 50, 60 Hz)
|
IEC male
|
Used to connect the User Control Console to a power source.
|
The User Control Console side includes the following connections:
|
CONNECTION
|
TYPE
|
FUNCTION
|
|
Tether Whip (Specifications)
|
8 pin round female
|
Used to connect the User Control Console to the tether for power, communications, video and accessory support.
|
|
Monitor Power
|
|
Provides 12 Volts DC. Used to provide power to the monitor.
|
|
Monitor Signal
|
Display Port Female
|
Used to provide the video signal to the monitor.
|
|
USB Ports (3)
|
Type A female
|
Can be used to connect USB devices to the computer via the User Control Console.
|
|
Ethernet
|
RJ-45 female
|
Can be used to connect the User Control Console to the computer for Ethernet based ROV accessories.
|
 The Display Port cable uses a locking locking connector. Make sure to press the release button when disconnecting the cable to avoid damaging the connector.
|
