Horizontal Thruster Bearing Removal Procedures

Time required for this step: Approximately 2 Minutes (4 Minutes for both sides)

Tools required for this step:

Parts involved in this step:

GTO-015 Horizontal Thruster Bearing

QuantityPart NumberPart Description
1HT-002-GYThruster Part Horizontal Cone (Pro 4)
1GTO-015Thruster Part Horizontal Bearing (GTO, Deep Blue, Pro 4)
1GTO-013Thruster Part Horizontal Bearing Retainer (GTO, Deep Blue, Pro 4)

Steps

Note: The following step-by-step instructions apply to one side. Repeat these steps on both sides if you plan to remove both Horizontal Bearings.

  1. Insert the dowel or similar instrument into the front (larger) end of the horizontal thruster cone with the tip of the dowel against the horizontal thruster bearing.

  2. Press the horizontal thruster bearing and spacer out of the horizontal thruster tube.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view


VideoRay Documentation Only

[ Help us improve this document ]

[ Print this page ]

Pro 4 Maintenance Manual, Version: Advanced 2.00.00
Copyright © 2019, VideoRay LLC - The Global Leader in Micro-ROV Technology