Using VITAL

Safety First

Do NOT use your system or VITAL if there is any risk of fire or electric shock, for example, if you see smoke, sparks, or flames, or if any of these were observed when the problem originated. Turn off the power switch and unplug the power cord if it is safe to do so, or cut power to the outlet. Contact VideoRay Customer Care or your local VideoRay Authorized Service Center for a complete diagnosis and repair.

Do NOT use a system with a damaged power cord or tether.

Prior to Using VITAL

Before using VITAL, make sure that you have followed the standard set-up and pre-dive inspection procedures and have checked the obvious along the way. VITAL assumes that you have a basic operational understanding of the system and expects you to make sure the system is plugged in to a known working power source and is turned on.

VITAL Procedures

VITAL will present you with a question and a list of possible responses. Click on the response that best answers the question. Each response will result in either another question to narrow the problem down further, or a diagnosis and recommended solution.

Each solution presented by VITAL is rated based upon the required knowledge and skill required to perform the repair procedure. These ratings () can help you decide if you should attempt the repair yourself or seek more qualified help. If you decide that a repair procedure exceeds your technical expertise, contact VideoRay Customer Care for further support.