Vertical Thruster Propeller Kit Removal Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

7/16 Inch Open End or Socket Wrench

Parts involved in this step:

GTO-006LS-KIT Vertical Thruster Propeller Kit

Quantity	Part Number	Part Description
1	GTO-006LS-KIT	Propeller Kit Vertical 45mm 3 Blade Shaved (Pro 4)

Steps

Loosen, but do not remove, the 7/16 inch acorn nut at the outboard end of the vertical propeller.
Pull the vertical propeller from the vertical thruster shaft.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tips

The vertical propeller nut has right-handed threads. Turn the nut counterclockwise, when viewed from the top of the ROV, in order to loosen it.

If the vertical propeller does not come off of the vertical thruster shaft easily after loosening the nut, tap the nut while pulling on the propeller hub. This should loosen the propeller collet and the propeller should slide free from the shaft.

[ Help us improve this document ]

[ Print this page ]