Float Block Kit Removal Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

• None

Parts involved in this step:

FB-001-KIT-P4 Float Block Kit

Steps

1. Remove any accessories that are attached to the float block.

2. Remove the 1/4-20 X 1-1/4 inch thumb screw and 1/4 inch washer.

3. Lift the float block off of the ROV.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view