Hand Controller Diagnostics
Hand controller consists of switches, analog knobs, an interface board and cables. Problems include complete or partial loss of function, and incorrect response.
| Issue |
Items to Check |
Status / Resolution |
| No function |
Check that the cable is plugged in. |
Plug in the cable. |
|
Verify whether the controller works in a Windows computer. |
If not, repair or replace the controller. If it does work, suspect an interface or application problem. |
| Partial function |
Check the response in the Vehicle configuration diagnostics. |
Isolate the problem and repair or replace the controller, or change the signal map to allow the function to be used. |
| Improper function |
Verify it is being held correctly. |
Hold the controller correctly. |
|
Check the Signal Mapper Interface |
Correct the signal map. |
|
