Horizontal Thruster Propeller Kit (Left and Right) Replacement Overview

Skill level recommended: Novice

Total time required: Approximately 2 Minutes (4 Minutes for both sides)

Tools required:

• 7/16 Inch Open End or Socket Wrench

The following components must be replaced:

• Horizontal Thruster Propeller Kit (Left and Right)

Notes:

Horizontal propellers are counter rotating and must be installed on the correct side. When installed properly, the blade pointing up will curve toward the middle of the ROV when viewed from behind.

Before replacing the horizontal propeller, check to make sure that the thruster shaft is not bent or scored.