Vertical Thruster Cartridge Seal Replacement Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

Parts involved in this step:

CS-KIT-BL(v) Vertical Thruster Cartridge Seal

QuantityPart NumberPart Description
1CS-KIT-BL(h)Cartridge Seal Assembly Blue
190295A090Washer #6 x 0.06" Flat Nylon (Thick)

Steps

  1. Orient the cartridge seal with its O-ring end toward the ROV.

  2. Press the cartridge seal all the way down the thruster shaft until it is seated in the vertical motor mount. You should not be able to see the O-ring when the cartridge seal is seated.

  3. Place the cartridge seal washer on thruster shaft.

  4. Press the cartridge seal washer down the shaft until is it seated inside of the cartridge seal.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tip

You will notice that some silicone gel will be pushed from the center core of the cartridge seal. This is normal. The gel is used to keep the cartridge seal oil from leaking out of the cartridge seal during shipping and storage and can be wiped away with a tissue.


VideoRay Documentation Only

[ Help us improve this document ]

[ Print this page ]

Pro 4 Maintenance Manual, Version: Advanced 2.00.00
Copyright © 2019, VideoRay LLC - The Global Leader in Micro-ROV Technology