Horizontal Thruster Tube Removal Procedures

Time required for this step: Approximately 5 Minutes (10 Minutes for both sides)

Tools required for this step:

• 9/64 Inch Allen Wrench

Parts involved in this step:

HT-001-GY Horizontal Thruster Tube

Steps

Note: Both the left (port) and right (starboard) Horizontal Thrust Tubes must be removed. Repeat these steps on both sides.

1. From inside the main hull, remove the two 8-32 X 3/4 inch socket cap screws that hold the horizontal thruster tube to the main hull tube.

2. Remove the horizontal thruster tube from the main hull.

If the video above doesn't play in your browser, click this play icon to try an alternate method: ,