Comprehensive Parts List for:

Camera Ribbon Cable

The following list is provided to identify all of the parts that will be involved in the process of removing and replacing the Camera Ribbon Cable. Replacing these parts with new parts is not required unless it is determined that a part is not suitable for reuse. VideoRay recommends that new O-rings be used whenever possible.

FB-001-KIT-P4 Float Block Kit

QuantityPart NumberPart Description
1VR-PRO4-06-0001Float Block Assembly - Filled (Pro 4)
191744A542Screw 1/4"-20 x 1" Thumb SS
192141A029Washer 1/4" x 0.05" Flat SS
2FB-PLG-ACC-KITFloat Block Assembly Insert Small

SK-PRO4-KIT Skid Kit

QuantityPart NumberPart Description
1VR-PRO4-07-0001Skid Assembly
491772A151Screw #6-32 x 3/4" Pan Head Phillips SS
4561-06012Washer #6 Insulating Nylon
48BW-001-4Ballast Weight Part Rod (Pro 4)
191772A192Screw #8-32 x 3/8" Pan Head Phillips SS
198370A011Washer #8 x 0.075" Flat SS

GTO-006L-KIT~GTO-006R-KIT Horizontal Thruster Propeller Kit (Left and Right)

QuantityPart NumberPart Description
2GTO-006L-KITPropeller Kit Horizontal 100mm 3 Blade Left (GTO, Deep Blue, Pro 4)
2GTO-006R-KITPropeller Kit Horizontal 100mm 3 Blade Right (GTO, Deep Blue, Pro 4)

VR-PRO4-08-0001 Horizontal Thruster Nozzle Kit

QuantityPart NumberPart Description
2GTO-017-ASSMThruster Nozzle Assembly
2GTO-012Thruster Nozzle Part Nut (GTO, Deep Blue, Pro 4)

MHU-002-GY-KIT Dome Retaining Rings and Main Hull Rods

QuantityPart NumberPart Description
2MHU-002-GYMain Hull Part Dome Retaining Ring (Pro 4)
2MHU-005Main Hull Part Rod
491855A271Nut #6-32 x 5/16" Acorn SS
291831A007Nut #6-32 x 5/16" Nylock
4561-06012Washer #6 Insulating Nylon

MHU-004(f) Front Dome

QuantityPart NumberPart Description
1MHU-004(r)Main Dome
1OR-152O-Ring #152

VR-PRO4-13-0001-N Front Hull Ring Assembly with Camera

QuantityPart NumberPart Description
1VR-PRO4-13-0001-NCamera Assembly Front with Port Ring (Pro 4) (NTSC)
1OR-154O-Ring #154

MHU-004(r) Rear Dome

QuantityPart NumberPart Description
1MHU-004(r)Main Dome
1OR-152O-Ring #152

MHU-003-GY-KIT Rear Hull Ring Assembly

QuantityPart NumberPart Description
1MHU-003-GY-KITMain Hull Assembly Port Ring (Pro 4)
1OR-154O-Ring #154

TLK-005-300-CN Desiccant Pack

QuantityPart NumberPart Description
1TLK-005-300-CNDesiccant Packet

CB-01-PRO4-SET ROV Board Set

QuantityPart NumberPart Description
1CB-01-PRO4-SETCircuit Board ROV Set (Pro 4)

HF12U-10-ND Camera Ribbon Cable

QuantityPart NumberPart Description
1HF12U-10-NDCable 10" Ribbon 12 Conductor

This list includes quantities for both sides where applicable. With the exception of the horizontal thruster propellers, parts can be interchanged between left (port) and right (starboard) sides.


VideoRay Documentation Only

[ Help us improve this document ]

[ Print this page ]

Pro 4 Maintenance Manual, Version: Advanced 2.00.00
Copyright © 2019, VideoRay LLC - The Global Leader in Micro-ROV Technology