Comprehensive Parts List for:

Camera Interface Printed Circuit Board

The following list is provided to identify all of the parts that will be involved in the process of removing and replacing the Camera Interface Printed Circuit Board. Replacing these parts with new parts is not required unless it is determined that a part is not suitable for reuse. VideoRay recommends that new O-rings be used whenever possible.

FB-001-KIT-P4 Float Block Kit

SK-PRO4-KIT Skid Kit

GTO-006L-KIT~GTO-006R-KIT Horizontal Thruster Propeller Kit (Left and Right)

VR-PRO4-08-0001 Horizontal Thruster Nozzle Kit

MHU-002-GY-KIT Dome Retaining Rings and Main Hull Rods

MHU-004(f) Front Dome

VR-PRO4-13-0001-N Front Hull Ring Assembly with Camera

VR-PRO4-13-0002-N Camera Assembly

CAM-CBA-002 Camera Interface Printed Circuit Board

This list includes quantities for both sides where applicable. With the exception of the horizontal thruster propellers, parts can be interchanged between left (port) and right (starboard) sides.