VideoRay Pro 4 Software DownloadsVideoRay's Position Statement regarding Microsoft Windows Versions and upgrades Microsoft Windows 8 and 10 require additional steps to install drivers. Windows 7 does not require these steps. If you are unsure what downloads you require, please contact This email address is being protected from spambots. You need JavaScript enabled to view it. VideoRay Hardware DriversSerial to USB Converter (Required for the computer to connect to the ROV.) The Pro 4 Ultra uses a different Serial to USB Converter driver than the Pro 4. Make sure you use the correct Driver. You must install only the correct driver. Installing the wrong driver or more than one driver may cause your system to fail. Contact VideoRay Support at support@vidoeray.com if you are not sure which driver to install.
Video Capture Device (Required for computer to capture video from the ROV. Only one of the drivers below is needed. See: Driver Installation Notes, or Contact VideoRay Support for information about which driver to install.) You must install only the correct driver. Installing the wrong driver or more than one driver may cause your system to fail. Contact VideoRay Support at support@vidoeray.com if you are not sure which driver to install.
GPS Antenna Driver (required if using a topside GPS antenna with your Pro 4.)
VideoRay Cockpit SoftwareMost Recent Update
Prior Releases
Optional Configuration Files and DriversRequired only for specific options or accessories as listed. These versions are only required for PAM enabled versions of these options or accessories. Rotating Manipulator Driver / Setup Lyyn Visibility Enhancement Serial Driver (requires serial interface inside control panel) Driver / Setup Tritech Micron Echosounder Altimeter Driver / Setup Cygnus Ultrasonic Thickness Gauge Driver / Setup Teledyne RDI DVL (Doppler Velocity Log) Driver / Setup ROV GPS Antenna Driver / Setup Laser Scaling Device Driver / Setup Radiation Sensor Setup YSI Sonde Driver / Setup Lateral Thruster Configuration Set (includes hand controller configuration file) Driver / Setup |