The Inuktun Rotating Manipulator includes 5 different sets of jaws, including a cutter. The jaws can be rotated a full 360 degrees. On the Defender, the manipulator is mounted on a dual position track so that it can be extended straight ahead or angled 30 degrees downward. Vehicle pitch adds even more angular control for hard to reach places. The manipulator is held in the retracted position by two screws – one on each side near the back of the manipulator. It is spring loaded, so resistance to extending should be applied when removing the screws. The screws can be completely removed or reinserted after the manipulator has been extended.