LYYN Visibility Enhancement Controls

The LYYN Visibility Enhancement Controls provide a convenient method to adjust the LYYN settings directly from VideoRay Cockpit.

The LYYN Visibility Enhancement accessory is an optional accessory and may not be included.

Software control of the LYYN requires specific hardware interface components within the control panel. Control panels that include a LYYN keypad are typically not configured with these components and the LYYN instrument will not be presented. If the LYYN keypad is present, the keypad can be used to control the LYYN features.

Display

Use

The LYYN Visibility Enhancement includes functions to turn on or off, change the amount, change the area covered.

To turn the LYYN On or Off, click on the power button in the upper right hand corner.

To increase or decrease the intensity of the enhancement (also called "Lyynification"), click on the + or - buttons respectively, or click on the indicator bar to set the Lyynification value directly.

To change the Lyynification window area size, click on the Lyynification size button (the concentric boxes in the lower right hand corner).

To invert the Lyynification from inside to outside the window area, click on the Lyynification invert button. (the filled and open boxes in the lower right hand corner).

The size and display of the LYYN Instrument can be adjusted. See the Instruments section of this guide for more information.

The LYYN Visibility Enhancement system is optional and may not be included in all VideoRay Pro 4 configurations.