Command: vr_setid

The vr_setid command is used to set the Node_ID and Group_ID of a module.

Use

vr_setid [OPTIONS] SN Node_ID Group_ID

SN - See the table below
Node_ID - The Node ID to program into the module (1 - 255)
Group_ID - The Group ID to program into the module (1 - 255)

OPTION	Alternate	Argument(s)	Description	Default
-?	--help		Display this help information
--version			Display the Version Number
-c	--com	Com_Port_Name	Com port to use	dev/ttyUSB0
--arguments		Node_ID Group_ID	The Node_ID (1 - 254) and the Group_ID (1 - 254) to program into the module

Examples

To use vr_enum on modules connected to the communications module, you need to open a virtual port and specify the port to use. See vr_create_virtport_all.sh for more information.

For the examples below, replace "S.N" with the actual serial number. The serial number is case sensitive.

Power Module

vr_setid S/N 1 196

Communications Module

vr_setid S/N 2 193

AHRS Module

vr_setid S/N -c vrport2 3 194

Thruster Module (Use the correct Serial Number and Node ID)

vr_setid S/N 5 129

Camera Module

vr_setid SN -c vrport3 4 196

LED Module (Use the correct Serial Number and Node ID)

vr_setid S/N 11 131

Some of the options use two dashes "--," not a long dash