[ Print this page ]

Environmental and Chemical Compatibility

The VideoRay Pro 4 is designed and approved for use in fresh or naturally occurring salt water and non-hazardous fresh air environments. While VideoRay recognizes that some customers may desire to use the vehicle in other solutions or environments, such use is entirely at the discretion and liability of the customer and doing so may void the product warranty.

The following additional solutions have been researched by VideoRay and use in these solutions is deemed to fall within the acceptable use guidelines and will not affect the warranty.

Solution	Notes
Chlorine / Bromine	Solutions of no more than 400 PPM. Follow use with 30 minute soak and rinse in fresh water.
pH Range	6 < pH < 8. Follow use with 30 minute soak and rinse in fresh water.

Temperature

The maximum recommended temperature for sustained use is 50 C.

Non Approved Solutions and Environments

VIDEORAY EXPLICITLY DOES NOT CONDONE THE USE OF ITS PRODUCTS IN ANY SOLUTIONS OR ENVIRONMENTS OTHER THAN THOSE EXPLICITLY LISTED ABOVE, AND ASSUMES NO LIABILITY FOR USE IN OTHER SOLUTIONS OR ENVIRONMENTS.

Risks of using VideoRay Systems in Non Approved Solutions or Environments may include, but are not limited to:

Biological contamination and illness

Chemical contamination and illness

Poisoning

Death

Fire

Explosion

USE OF VIDEORAY PRODUCTS IN OTHER SOLUTIONS OR ENVIRONMENTS IS ENTIRELY AT THE DISCRETION OF THE CUSTOMER / OPERATOR AND THE CUSTOMER / OPERATOR ASSUMES ALL LIABILITIES FOR SUCH USE.