Mission Specialist Pro 5 Quick Start Instructions

Lesson Description

• This lesson provides step-by-step instructions about preparing a Mission Specialist Pro 5 for operations.

• Topics

  1. Quick Start Instructions
  2. General Precautions
  3. Confirm Readiness
  4. Visual Inspection
  5. Make the Connections
  6. ROV to Tether Connection
  7. Tether to Tether Connection
  8. Operator Control Console
  9. Power On the System
  10. Functions Test
  11. Launch the Vehicle
  12. Stabilize the Vehicle
  13. Initialize the Navigation System
  14. Operational Readiness
  15. Parting Tips

• Lesson Duration: Approximately 12 minutes.

 
Intended Audience

• Novice Operator Candidates
• Technician Candidates

 
Learning Objectives

1. Be able to inspect the Defender system and confirm its readiness for operations, or identify issues that must be corrected before conducting operations<./li>
2. Be able to make all connections necessary for operation.
3. Be able to turn the system on and confirm its operational state.
4. Be able to test the systems primary functions, or identify issues that must be corrected before conducting operations.
5. Be able to confirm the accessory operations, or identify issues that must be corrected before conducting operations.
6. Be able to ballast and trim the vehicle according to the payload and water density.
7. Be aware of the coordination required by the operator and tether handler.
8. Be able to launch the vehicle and stabilize it in preparation for stating an operation.

 
Recommended Prerequisites

1. VideoRay Mission Specialist Introduction Video
2. How to Use these Lessons
3. Safety First
4. Mission Specialist Pro 5 System Overview
5. Mission Specialist Standards of Equipment Care and Handling
6. Mission Specialist Pro 5 Computer Overview
7. Greensea Workspace Overview
8. Mission Specialist Pro 5 IP65 Hand Controller Mapping