VideoRay Laser Scaling Device Operating Tips

The VideoRay Laser Scaling Device provides a pair of parallel beams that are set a fixed distance apart. Knowing the distance between the beams can be used to determine the size of objects that are illuminated by them.

Hardware Set Up

The laser scaling device is mounted to the ROV and the cable must be plugged into the ROV's accessory port.

Operation

If the laser is configured with On/Off control, the Laser Instrument will be displayed.

To turn the laser On, click on the laser indicator in the instrument. This will turn on the laser and illuminate the laser indicator. For audible indication while turning the laser on, use the middle mouse button to click on the laser indicator.

To turn the laser Off, click on the laser indicator in the instrument.

To reset the laser scaling device, click on the Device Communications Reset button.

This equipment is optional and may not be included in all VideoRay Pro 4 configurations.