Camera Sub-menu: DAY & NIGHT
|
MENU ITEM
|
DESCRIPTION
|
D&N Mode
Day & Night Mode
|
The Day & Night Mode sets whether the camera image is color, black and white, or the camera automatically switches between these two modes depending upon the lighting situation. When the Day & Night Mode is set to Auto, the image will be color unless the light decreases below a threshold. The camera will switch to black and white when the light decreases below the threshold. The camera will switch to color when the light increases above the threshold.
- COLOR - Set the image to color.
- B/W - Set the image to black and white.
- AUTO - Allow the camera to select color or black and white depending upon the lighting situation.
- EXT - Use an external input for Day & Night Mode control. This mode is not recommended for the Pro 4.
|
|
LEVEL
|
For use with an external photocell. This mode is not available for the Pro 4.
|
|
DWELL TIME
|
For use with an external photocell. This mode is not available for the Pro 4.
|
|
INITIAL
|
Reset this sub-menu to the factory default state. VideoRay uses optimized camera menu settings and the factory default settings should not be used. If you want to reset this sub-menu to the VideoRay optimized settings, use the recommended settings described for this sub-menu.
|
|
RETURN
|
Return to the main menu.
|
|
Settings in bold are available for use with the VideoRay Pro 4. VideoRay defaults are underlined.
