Camera->SPECIAL Sub-menu: COMM ADJ
|
MENU ITEM
|
DESCRIPTION
|
|
CAM ID
|
Set the Camera ID. The Camera ID can be set to a number from 0 to 255. The Camera ID can be displayed over the image. See the DISPLAY sub-menu for information on how to display the Camera ID once it has been set.
|
|
BAUDRATE
|
Set the baud rate for serial communications to the camera. This feature is not supported by the VideoRay Pro 4.
|
|
INITIAL
|
Reset this sub-menu to the factory default state. VideoRay uses optimized camera menu settings and the factory default settings should not be used. If you want to reset this sub-menu to the VideoRay optimized settings, use the recommended settings described for this sub-menu.
|
|
RETURN
|
Return to the Special sub-menu.
|
|
Settings in bold are available for use with the VideoRay Pro 4. VideoRay defaults are underlined.
