KCF Technologies Smart Tether Operating Tips

This section describes the basic set up procedures for using the KCF Smart Tether with a VideoRay Pro 4. See the KCF Smart Tether User Manual for additional information.

Hardware Set Up

Connect the Smart Tether the same way you would connect a standard tether. If you are using more than one tether, connect the Smart Tether closest to the ROV.

If you are using a GPS antenna, connect the antenna to the computer and make sure the antenna has an unobstructed view of the sky (satellites).

Operation

To start the Smart Tether software, click on the KCF Smart Tether button on the VideoRay Cockpit control bar. Follow the instructions in the KCF Smart Tether User Manual.

Available for hire only at this time. Contact VideoRay for more information.