Wide Area Search (WAS)
Wide Area Search (WAS), Wide Area Search (WAS)

 2.4.1  Start the Mission

To start the mission, Right-click on the desired waypoint and select Go to Waypoint. If the coverage you placed has the first waypoint on the far side of the region, you can first click on the Reverse button in the Mission / Jog Controls window so the mission will be navigated in the reverse order. In this case, right-click on the last waypoint and Select Go to Waypoint.

You can start on any waypoint. The path will be through increasing waypoints or decreasing waypoints depending on the state of the Reverse button. You can also stop the mission at any time and restart at any waypoint.

Document Path: Wide Area Search (WAS) Standard Operating Procedures > Step-by-Step > 2 On-site Operations > 2.4 Conduct the Mission > 2.4.1 Start the Mission