Pier Pilings Inspection (PPI)
Standard Operating Procedures
Copyright
Introduction
Introduction
Copyright
Language Support
Table of Contents
About this Document
Customize this Document
How to Get Help
Before Contacting Support
PPI Overview
Vertical Passes
Circumferential Passes
Navigation Pattern.htm
PPI Step-by-Step
1 Mission Planning
1.1 Obtain a Chart
1.2 Load the Chart
1.3 Set Up Video Overlay
1.4 Define Inspection Parameters
1.5 Set Waypoint Defaults
1.6 Place Waypoints
1.7 Save the Mission Plan
2 On-site Operations
2.1 Site Selection and Set Up
2.1.1 Begin the Predive Checklist
2.1.2 Initialize the Recording
2.1.3 Launch the Vehicle
2.2 Navigate to the Entry Point
2.3 Start the Recording
2.4 Conduct the Inspection
2.4.1 Start the Inspection
2.4.2 Complete Additional Passes
2.4.3 Moce to the Next Piling
3 Vehicle Recovery
3.1 Return to Launch Site
3.2 Stop the Recording
3.3 Save the Mission
3.4 Recover the Vehicle
4 Post Mission
4.1 Analyze the Data
4.2 Archive the Data
Checklist
VideoRay Documentation Only
[
Educational Resources Library
]
[
Help us improve this document
]
[
Print this page
]
Pier Pilings Inspection (PPI) Standard Operating Procedures, Version: 1.00.00
