Pro 4
Pro 4, Pro 4

ROV Wire Harness Replacement Procedures

Time required for this step: Approximately 10 Minutes

Tools required for this step:

  • None

Parts involved in this step:

VTH-0054 ROV Wire Harness

QuantityPart NumberPart Description
1VTH-0054Wire Harness Assembly (Pro 4)

Steps

  1. Insert the wire harness into the main hull.

  2. The wires for the port (left) horizontal thruster tube are longer than the wires for the starboard side.

  3. Feed the port light and motor wires through the port horizontal thruster tubes.

  4. Feed the starboard (right) light and motor wires through the starboard horizontal thruster tubes.

  5. Orient the connector towards the rear of the ROV.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tip

When viewed from the rear toward the front of the ROV, the port side is on the left and the starboard side is on the right.

Document Path: Pro 4 Maintenance Manual > Main Hull Tube > Replacement Procedures > 3 - Wire Harness