Vertical Thruster Motor Adapter Replacement Procedures

Time required for this step: Approximately 5 Minutes

Tools required for this step:

• #2 Phillips Head Screw Driver
• Blue Loctite or equivalent

Parts involved in this step:

MAR-006 Vertical Thruster Motor Adapter

Quantity	Part Number	Part Description
1	MAR-006	Thruster Part Vertical Motor Adapter (Pro 4)
4	91772A112	Screw #4-40 x 5/8" Pan Head Phillips SS

Steps

1. Orient the vertical thruster motor adapter at the shaft end of the vertical motor assembly with the adapter shoulder away from the vertical motor.

2. Slide the vertical thruster motor adapter over the vertical thruster motor shaft and onto the vertical thruster motor assembly.

3. Align the screw holes of the vertical motor adapter and vertical motor assembly.

4. Apply blue Loctite to the 4-40 X 5/8 inch Phillips head screw threads.

5. Replace the four 4-40 X 5/8 inch Phillips head screws through the vertical thruster motor adapter and into the vertical thruster motor assembly and tighten the screws.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view