Camera Ribbon Cable Replacement Procedures

Time required for this step: Approximately 1 Minute

Tools required for this step:

• None

Parts involved in this step:

HF12U-10-ND Camera Ribbon Cable

Quantity	Part Number	Part Description
1	HF12U-10-ND	Cable 10" Ribbon 12 Conductor

Steps

1. Place the camera ribbon cable inside the main hull. The ribbon cable should pass on the starboard side of the vertical thruster motor assembly. It does not matter which end is installed first, but the ribbon cable should be installed with the contacts should be facing up.

2. At this point the camera ribbon cable is ready to be connected to the camera assembly and ROV board set when these components are installed.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view