Camera Replacement Procedures

Time required for this step: Approximately 5 Minutes

Tools required for this step:

• None

Parts involved in this step:

CAH-001N4 Camera

Quantity	Part Number	Part Description
1	CAH-001N4	Camera Package Front (Pro 4) (NTSC)

Steps

1. Orient the camera mount cover so that the round lens opening is to the left when viewed from the rear.

2. Orient the camera in position at the rear of the camera mount cover with the camera lens toward the cover and the connector on the rear of the camera toward the bottom.

3. Install the camera in the front camera mount cover.

4. Make sure the camera lens board is seated all of the way inside of the camera mount cover or you will not be able to get the camera mount base on properly.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tip

The camera is held in place by the camera mount cover and base. At this point there are no fasteners to secure it.