Pro 4
Pro 4, Pro 4

ROV Wire Harness Removal Procedures

Time required for this step: Approximately 5 Minutes

Tools required for this step:

  • None

Parts involved in this step:

VTH-0054 ROV Wire Harness

QuantityPart NumberPart Description
1VTH-0054Wire Harness Assembly (Pro 4)

Steps

  1. Carefully feed the wires from the lights and horizontal thruster motors out of the horizontal thruster tubes and into the main hull.

  2. Remove the wire harness from the main hull.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Document Path: Pro 4 Maintenance Manual > Main Hull Tube > Removal Procedures > 22 - Wire Harness