Vertical Thruster Motor Mount Removal Procedures

Time required for this step: Approximately 5 Minutes

Tools required for this step:

• #2 Phillips Head Screw Driver

Parts involved in this step:

VTH-002 Vertical Thruster Motor Mount

Quantity	Part Number	Part Description
1	VTH-002	Thruster Part Vertical Motor Mount
4	91772A146	Screw #6-32 x 3/8" Pan Head Phillips SS

Steps

1. Remove the four 6-32 X 3/8 inch Phillips head screws that hold the vertical motor mount to the vertical motor assembly.

2. Pull the vertical motor mount off of the vertical motor assembly.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view