Pro 4
Pro 4, Pro 4 |
Comprehensive Parts List for:Vertical Thruster KitThe following list is provided to identify all of the parts that will be involved in the process of removing and replacing the Vertical Thruster Kit. Replacing these parts with new parts is not required unless it is determined that a part is not suitable for reuse. VideoRay recommends that new O-rings be used whenever possible. FB-001-KIT-P4 Float Block Kit
SK-PRO4-KIT Skid Kit
GTO-006LS-KIT Vertical Thruster Propeller Kit
FB-008 Vertical Thruster Splitter
CS-KIT-BL(v) Vertical Thruster Cartridge Seal
GTO-006L-KIT~GTO-006R-KIT Horizontal Thruster Propeller Kit (Left and Right)
VR-PRO4-08-0001 Horizontal Thruster Nozzle Kit
MHU-002-GY-KIT Dome Retaining Rings and Main Hull Rods
MHU-004(f) Front Dome
VR-PRO4-13-0001-N Front Hull Ring Assembly with Camera
MHU-004(r) Rear Dome
MHU-003-GY-KIT Rear Hull Ring Assembly
TLK-005-300-CN Desiccant Pack
CB-01-PRO4-SET ROV Board Set
VR-PRO4-15-0001 Pressure Sensor Kit
VR-PRO4-02-KIT Vertical Thruster Kit
This list includes quantities for both sides where applicable. With the exception of the horizontal thruster propellers, parts can be interchanged between left (port) and right (starboard) sides. |
Document Path: Pro 4 Maintenance Manual > Vertical Thruster Kit > Comprehensive Parts List