Horizontal Thruster Drive Train Assembly Removal Procedures

Time required for this step: Approximately 3 Minutes (6 Minutes for both sides)

Tools required for this step:

• None

Parts involved in this step:

VR-PRO4-01-0001 Horizontal Thruster Drive Train Assembly

Quantity	Part Number	Part Description
1	VR-PRO4-01-0001	Thruster Assembly Horizontal Drive Train Brushless (Pro 4)
1	OR-133	O-Ring #133
1	OR-031	O-Ring #031

Steps

Note: The following step-by-step instructions apply to one side. Repeat these steps on both sides if you plan to remove both Horizontal Drive Trains.

1. Pull the horizontal drive train assembly from the horizontal thruster tube. If it does not come out easily, wiggle it gently from side to side while pulling it. Do NOT pull the drive train out too fast, or you could damage the wires.

2. Disconnect the three horizontal drive train wires by pulling apart each connector.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view