Pro 4
Pro 4, Pro 4

Desiccant Pack Removal Procedures

Time required for this step: Approximately 1 Minute

Tools required for this step:

Parts involved in this step:

TLK-005-300-CN Desiccant Pack

QuantityPart NumberPart Description
1TLK-005-300-CNDesiccant Packet

Steps

There are three desiccant packs.

  1. Pull the desiccant pack out from under the rear of the ROV board set.

  2. Pull the desiccant pack out from behind the LED Light Modules.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tip

If you cannot grab the desiccant pack with your fingers, you can use a dental pick or similar instrument to hook it and pull it free. Be careful not rip the desiccant pack bag.

Document Path: Pro 4 Maintenance Manual > Termination Block > Removal Procedures > 11 - Desiccant Pack