Strain Relief Cable Kit Removal Procedures

Time required for this step: Approximately 3 Minutes

Tools required for this step:

• #2 Phillips Head Screw Driver

Parts involved in this step:

THR-HARNESS-P4-KIT Strain Relief Cable Kit

Quantity	Part Number	Part Description
1	THR-HARNESS-P4	Strain Relief Assembly ROV (Pro 4)
1	91772A192	Screw #8-32 x 3/8" Pan Head Phillips SS
1	98370A011	Washer #8 x 0.075" Flat SS

Steps

1. Turn the ROV upside down and rest securely so that it does not tip over and you do not damage the vertical propeller or shaft.

2. Remove the #8-32 X 3/8 inch screw and #8 x 0.075" flat washer that hold the strain relief cable to the skid.

3. Return the ROV to the upright position and slip the strain relief cable off of the term block.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view