Rear Dome Removal Overview

Skill level recommended: Intermediate

Total time required: Approximately 22 Minutes

Tools required:

• #2 Phillips Head Screw Driver
• 7/16 Inch Open End or Socket Wrench
• 5/16 Inch Open End Wrench or Nut Driver
• 5/16 Inch Open End Wrench or Nut Driver (Additional)
• Wooden Dowel Rod 3/8" x 12"

The following components must be removed:

• Float Block Kit
• Skid Kit
• Horizontal Thruster Propeller Kit (Left and Right)
• Horizontal Thruster Nozzle Kit
• Dome Retaining Rings and Main Hull Rods
• Rear Dome

Notes:

• Do Not use solvents, including alcohol, to clean the dome. Doing so may cause the dome to haze or crack. use mild soap and water to clean the dome.

• Do NOT use any metal tools to pry the rear dome from the rear hull ring.