Pro 4
Pro 4, Pro 4

Front Dome Removal Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

Parts involved in this step:

MHU-004(f) Front Dome

QuantityPart NumberPart Description
1MHU-004(r)Main Dome
1OR-152O-Ring #152

Steps

  1. Using the tabs on the side of the front dome, gently pull the dome from the front hull ring.

  2. If you plan to replace the O-ring, remove it by pinching it around the front hull ring to create a slack section that can be grabbed. Do NOT use a metal tool to remove the O-ring.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tips

If the front dome is stuck, you can try to force it off using a wooden dowel against the back side of one of the tabs on the dome and tapping on the dowel.

Sometimes the front hull ring assembly will come off while trying to remove the front dome. If this happens, remove the front dome after the front hull ring assembly is removed. Follow the instructions for replacing the front hull ring assembly before replacing the front dome.

Document Path: Pro 4 Maintenance Manual > Camera > Removal Procedures > 6 - Front Dome