Rear Hull Ring Assembly Removal Procedures

Time required for this step: Approximately 4 Minutes

Tools required for this step:

• None

Parts involved in this step:

MHU-003-GY-KIT Rear Hull Ring Assembly

Quantity	Part Number	Part Description
1	MHU-003-GY-KIT	Main Hull Assembly Port Ring (Pro 4)
1	OR-154	O-Ring #154

Steps

1. Using you index finger under the inside top of the rear hull ring and your thumb against the accessory port connector, gently pry the rear hull ring from the main hull. If the rear dome ring binds while pulling the top, you may need to pull the bottom to even it up for easier removal.

2. If you plan to replace the O-ring, remove it by pinching it around the rear hull ring to create a slack section that can be grabbed. Do NOT use a metal tool to remove the O-ring.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view