Comprehensive Parts List for:

LED Light Mount

The following list is provided to identify all of the parts that will be involved in the process of removing and replacing the LED Light Mount. Replacing these parts with new parts is not required unless it is determined that a part is not suitable for reuse. VideoRay recommends that new O-rings be used whenever possible.

LT-001-4 Light Dome

Quantity	Part Number	Part Description
2	LT-001-4	Light Part Dome Industrial
2	OR-135	O-Ring #135

VR-PRO4-05-0001 LED Light Module Assembly

Quantity	Part Number	Part Description
2	VR-PRO4-05-0001	Light Assembly LED Module (Pro 4)

MAR-002-ASSM LED Light Reflector Set

Quantity	Part Number	Part Description
4	MAR-002-ASSM	Light Assembly LED Reflector (Pro 4)
8	91249A058	Screw #2-56 x 1/2" Pan Head Phillips SS Black

VR-PRO4-05-0002 LED Light Printed Circuit Board

Quantity	Part Number	Part Description
2	VR-PRO4-05-0002	Circuit Board ROV LED Lights (Pro 4 front)
4	91249A050	Screw #2-56 x 1/4" Pan Head Phillips SS Black
2	WM1845-ND	Connector 2 x 1 Molex Micro-Fit Female
4	538-43030-0010	Crimp Pin 26-30 AWG Molex Micro-Fit Female

MAR-001 LED Light Mount

Quantity	Part Number	Part Description
2	MAR-001	Light Part LED Mount (Pro 4)

This list includes quantities for both sides where applicable. With the exception of the horizontal thruster propellers, parts can be interchanged betweeen left (port) and right (starboard) sides.