Pro 4
Pro 4, Pro 4

Float Block Kit Removal Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

  • None

Parts involved in this step:

FB-001-KIT-P4 Float Block Kit

QuantityPart NumberPart Description
1VR-PRO4-06-0001Float Block Assembly - Filled (Pro 4)
191744A542Screw 1/4"-20 x 1" Thumb SS
192141A029Washer 1/4" x 0.05" Flat SS
2FB-PLG-ACC-KITFloat Block Assembly Insert Small

Steps

  1. Remove any accessories that are attached to the float block.

  2. Remove the 1/4-20 X 1-1/4 inch thumb screw and 1/4 inch washer.

  3. Lift the float block off of the ROV.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Document Path: Pro 4 Maintenance Manual > Wire Harness > Removal Procedures > 1 - Float Block