Pro 4
Pro 4, Pro 4

Vertical Thruster Cartridge Seal Removal Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

  • None

Parts involved in this step:

CS-KIT-BL(v) Vertical Thruster Cartridge Seal

QuantityPart NumberPart Description
1CS-KIT-BL(h)Cartridge Seal Assembly Blue
190295A090Washer #6 x 0.06" Flat Nylon (Thick)

Steps

  1. Pull the vertical cartridge seal off of the vertical thruster shaft. Make sure to keep track of the cartridge seal washer inside the top of the cartridge seal.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tip

If the vertical cartridge seal is hard to pull free from its seat, twist the cartridge seal to free it for easier removal.

Document Path: Pro 4 Maintenance Manual > Vertical Motor Shield > Removal Procedures > 5 - Vertical Cartridge Seal