ROV Board Set Removal Procedures

Time required for this step: Approximately 5 Minutes

Tools required for this step:

• None

Parts involved in this step:

CB-01-PRO4-SET ROV Board Set

Quantity	Part Number	Part Description
1	CB-01-PRO4-SET	Circuit Board ROV Set (Pro 4)

Steps

1. Gently slide the ROV board set part way out from the rear of the main hull.

2. Release the ROV CPU board connector latches and remove the connector from the ROV CPU board.

3. Slide the ROV board set a little further out of the main hull.

4. Remove the camera ribbon cable from the ROV CPU board.

5. Remove the pressure sensor ribbon cable from the ROV CPU board.

6. Slide the ROV board set a little further out of the main hull.

7. Remove the ROV power board connector from the ROV power control board.

8. Slide the ROV board set completely out of the main hull.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view