Compass - Navigation Module Removal Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

• Side Cutter

Parts involved in this step:

CB-002-COMP-GYRO-ASSM Compass - Navigation Module

Quantity	Part Number	Part Description
1	CB-002-COMP-GYRO-ASSM	Circuit Board ROV Assembly Nav (Pro 4)
1	7130K52	Cable Tie 4" Black

Steps

1. Carefully cut the cable tie that holds the compass/navigation module in place.

2. Gently lift the compass/navigation module straight up from the ROV CPU board. Be careful not to bend the pins as you remove the compass/navigation module from its socket.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view