Camera Mount Base Assembly Removal Procedures

Time required for this step: Approximately 4 Minutes

Tools required for this step:

• #2 Phillips Head Screw Driver

Parts involved in this step:

CAM-HSG-R Camera Mount Base Assembly

Quantity	Part Number	Part Description
1	CAM-HSG-R	Camera Part Mount Base Pivot Block (Pro 4)
2	96640A056	Screw #4-40 x 3/8" Flat Head Phillips SS Black

Steps

1. Unscrew the two 6-32 X 3/8 inch Phillips flat head screws that hold the camera mount base to the camera mount cover.

2. Remove the camera mount base from the camera mount cover.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view