Instruments Display

Turning Instruments On and Off

The top section of the Instruments Settings tab allows you to turn On or Off the display of instruments individually. Check the box next to the instrument to turn its display On. Uncheck the box next to the instrument to turn its display Off.

Instruments that are turned On individually will turn Off when using the Control Bar Off button.

Instruments that are turned Off individually will not turn On when using the Control Bar Transparent or Opaques buttons.

Saving Instruments Settings

The sizes, locations and On / Off state of instruments can be saved. Instruments settings are stored by name, so you can have multiple saved sets and switch according to job type or user preference.

Instruments settings are stored as a group. Instrument settings cannot be saved for each instrument individually.

Instruments settings are preserved from session to session. You only need to save an instrument settings if you want to be able to recover the arrangement later. The factory default instrument settings are also stored automatically, so you do not need to save the original out-of-the-box settings.

Load Instruments Settings

Use the Load Instruments Settings button to select a saved instruments set. Click on the Load Instruments Settings button and browse to select the desired saved instruments set and restore it. See the Save Instruments Settings next for information about to save an instruments set.

Save Instruments Settings

When the instruments are arranged as desired, click on the Save Instrument Settings button to store the arrangement. Enter a file name and click on the Save button.

Restore Instruments Settings to Factory Default Values

The Restore Instruments Settings to Factory Default Values button restores all instruments to their default size and location.