Pro 4
Operator's Manual, 2.00.00

Camera->SPECIAL Sub-menu: COMM ADJ

MENU ITEM DESCRIPTION
CAM ID Set the Camera ID. The Camera ID can be set to a number from 0 to 255. The Camera ID can be displayed over the image. See the DISPLAY sub-menu for information on how to display the Camera ID once it has been set.

BAUDRATE Set the baud rate for serial communications to the camera. This feature is not supported by the VideoRay Pro 4.

  • 2,400
  • 4,800
  • 9,600
  • 19,200
INITIAL Reset this sub-menu to the factory default state. VideoRay uses optimized camera menu settings and the factory default settings should not be used. If you want to reset this sub-menu to the VideoRay optimized settings, use the recommended settings described for this sub-menu.

RETURN Return to the Special sub-menu.

Default Settings

Settings in bold are available for use with the VideoRay Pro 4. VideoRay defaults are underlined.

Document Path: Pro 4 Operator's Manual > VideoRay Cockpit Guide > Instruments > Camera and Lights > Special > Communication Adjust