Start Up Diagnostics
Problems are most frequently found during start up. Your pre-dive check should catch these problems. Your post dive check will provide a baseline for the next dive and may catch problems that can be solved before the system is needed urgently.
If the system does not start or respond correctly, eliminate the tether from the set up and test again.
Issue |
Items to Check |
Status / Resolution |
No Power |
Is the AC power source working? |
Fix or change the AC power source. |
|
Is the GFCI tripped? |
Reset the GFCI. |
|
Check that all cables are plugged in. |
Plug in any loose cables. |
|
Are the power switches on? |
Turn on the power switch(es). |
No Display |
Monitor cable connected |
Connect monitor c able |
|
Monitor cable damaged |
Repair or replace cable |
|
Check brightness |
Adjust brightness |
|
Check for Computer boot |
restart the system |
No Desktop |
"GRUB" Menu visible |
Select UBUNTU to boot |
No ROV Power |
Check ROV power switch and 400 V indicator |
Turn on ROV power switch |
|
Check tether |
Fix or replace tether |
No ROV control/telemetry/etc. |
Check tether |
Fix or replace tether |
|
Run vr_enum |
If vr_enum reports modules present, problem is in the Ethernet. If vr_enum does not report modules present, power, telemtry or ROV system failure suspected. |